Exposure to Per- and Polyfluoroalkyl Substances in Lung Cancer Patients and Their Associations with Clinical Health Indicators.

Per- and polyfluoroalkyl substances (PFASs) have potential carcinogenicity, immunotoxicity, and hepatotoxicity. Research has been conducted on PFAS exposure in people to discuss their potential health effects, excluding lung cancer. In this study, we recruited participants (n=282) with lung cancer from Heilongjiang Province, northeast China. The PFAS concentrations were measured in their serum to fill the data gap of exposure, and relationships were explored in levels between PFASs and clinical indicators of tumor, immune and liver function. Ten PFASs were found in over 80% of samples and their total concentrations were 5.27-152 ng/mL, with the highest level for perfluorooctanesulfonate (median: 12.4 ng/mL). Long-chain PFASs were the main congeners and their median concentration (20.5 ng/mL) was nearly three times to that of short-chain PFASs (7.61 ng/mL). Significantly higher concentrations of perfluorobutanoic acid, perfluorononanoic acid and perfluorohexanesulfonate were found in males than in females (p < 0.05). Serum levels of neuro-specific enolase were positively associated with perfluoropentanoic acid in all participants and were negatively associated with perfluorononanesulfonate in females (p < 0.05, multiple linear regression models). Exposure to PFAS mixture was significantly positively associated with the lymphocytic absolute value (difference: 0.224, 95%CI: 0.018, 0.470; p < 0.05, quantile g-computation models) and serum total bilirubin (difference: 2.177, 95%CI: 0.0335, 4.33; p < 0.05). Moreover, PFAS exposure can affect γ-glutamyl transpeptidase through several immune markers (p < 0.05, mediating test). Our results suggest that exposure to certain PFASs could interfere with clinical indicators in lung cancer patients. To our knowledge, this is the first study to detect serum PFAS occurrence and check their associations with clinical indicators in lung cancer patients.

Occurrence, distribution and annual emissions of chlorinated paraffins in hazardous byproducts from municipal solid waste incineration plants in South China.

Nowadays incineration technology has become the most mainstream way for the disposal of municipal wastes. Short chain chlorinated paraffins (SCCPs) and medium chain chlorinated paraffins (MCCPs) are currently classified as new persistent organic pollutants (POPs) and candidate POPs under the Stockholm Convention, respectively. However, the occurrence and contamination characteristics of these main hazardous byproducts (e.g., leachate, fly ash, and bottom ash) from municipal solid waste incineration (MSWI) plants have remained unknown. This study focused on the SCCPs and MCCPs (defined as CPs) contamination and their annual emissions from leachate, fly ash, and bottom ash among three typical MSWI plants in Shenzhen, South China. Compared to the dissolved phase of the leachate, higher concentrations of CPs were detected in the adsorbed phase. The total concentrations of CPs ranged from lower method detection limits (1 in leachate (i.e., adsorbed phase) and bottom ash, while the opposite results were found in fly ash. The dominant SCCP congener groups were C10Cl6-7 in leachate and fly ash, and C13Cl6-7 in bottom ash. The dominant MCCP congener groups were C14Cl7-8 in leachate, fly ash and bottom ash samples. Principal component analysis (PCA) revealed the dominant CPs in fly ash were obviously different from those in leachate and bottom ash. Estimated total annual emissions of CPs from the three main hazardous byproducts generated from typical MSWI plants were estimated between 66.2 and 7510 kg/y and bottom ash contributed the most to the CP emissions. Overall, this study is the first report on CP contamination in hazardous byproducts from MSWI plants, and can provide basic data support for CP contamination control.

Comprehensive Identification and Ubiquitous Occurrence of Eight Classes of Rubber-Derived Vulcanization Accelerators in Urban Dusts.

Vulcanization accelerators (VAs) serve as crucial additives in synthetic rubber on a global scale. Despite their widespread use, the environmental presence, distribution, and associated exposure risks of VAs remain poorly understood. This study compiled a target list and conducted a screening for eight classes encompassing 42 VAs in diverse urban dust samples from South China. A total of 40 of the 42 target VAs were detectable across all four studied regions, among which 30 were identified for the first time in the environment. Among the eight structure-classified VA classes, xanthates exhibited the highest concentrations (median: 3810-81,300 ng/g), followed by thiazoles, guanidines, sulfenamides, dithiocarbamates, thiurams, thioureas, and others. The median total concentrations of all target VAs (∑VAs) were determined to be 5060 ng/g in road dust, 5730 ng/g in parking lot dust, 29,200 ng/g in vehicle repair plant dust, and 84,300 ng/g in household dust, indicating the widespread presence of numerous rubber-derived VAs in various urban environments. This study marked the first systematic effort to identify a wide range of emerging rubber-derived VAs prevalent in urban environments. The findings call for increased attention to these widely utilized but less well-evaluated chemicals in future research and environmental management efforts.

Dynamic defects boost in-situ H2O2 piezocatalysis for water cleanup.

Creating efficient catalysts for simultaneous H2O2 generation and pollutant degradation is vital. Piezocatalytic H2O2 synthesis offers a promising alternative to traditional methods but faces challenges like sacrificial reagents, harsh conditions, and low activity. In this study, we introduce a cobalt-loaded ZnO (CZO) piezocatalyst that efficiently generates H2O2 from H2O and O2 under ultrasonic (US) treatment in ambient aqueous conditions. The catalyst demonstrates exceptional performance with ~50.9% TOC removal of phenol and in situ generation of 1.3 mM H2O2, significantly outperforming pure ZnO. Notably, the CZO piezocatalyst maintains its H2O2 generation capability even after multiple cycles, showing continuous improvement (from 1.3 mM to 1.8 mM). This is attributed to the piezoelectric electrons promoting the generation of dynamic defects under US conditions, which in turn promotes the adsorption and activation of oxygen, thereby facilitating efficient H2O2 production, as confirmed by EPR spectrometry, XPS analysis, and DFT calculations. Moreover, the CZO piezocatalysts maintain outstanding performance in pollutant degradation and H2O2 production even after long periods of inactivity, and the deactivated catalyst due to metal ion dissolution could be rejuvenated by pH adjustment, offering a sustainable solution for wastewater purification.

Effective green treatment of sewage sludge from Fenton reactions: Utilizing MoS2 for sustainable resource recovery.

Effectively managing sewage sludge from Fenton reactions in an eco-friendly way is vital for Fenton technology's viability in pollution treatment. This study focuses on sewage sludge across various treatment stages, including generation, concentration, dehydration, and landfill, and employs chemical composite MoS2 to facilitate green resource utilization of all types of sludge. MoS2, with exposed Mo4+ and low-coordination sulfur, enhances iron cycling and creates an acidic microenvironment on the sludge surface. The MoS2-modified iron sludge exhibits outstanding (>95%) phenol and pollutant degradation in hydrogen peroxide and peroxymonosulfate-based Fenton systems, unlike unmodified sludge. This modified sludge maintains excellent Fenton activity in various water conditions and with multiple anions, allowing extended phenol degradation for over 14 d. Notably, the generated chemical oxygen demand (COD) in sludge modification process can be efficiently eliminated through the Fenton reaction, ensuring effluent COD compliance and enabling eco-friendly sewage sludge resource utilization.

Confining Bismuth-Halide Perovskite in Mesochannels of Silica Nanomembranes for Exceptional Photocatalytic Abatement of Air Pollutants.

Spatially confined photocatalysis has emerged as a viable strategy for the intensification of various redox reactions, but the influence of confined structure on reaction behavior is always overlooked in gas-solid reactions. Herein, we report a nanomembrane with confining Cs3 Bi2 Br9 nanocrystals inside vertical channels of porous insulated silica thin sheets (CBB@SBA(⊥)) for photocatalytic nitric oxide (NO) abatement. The ordered one-dimensional (1D) pore channels with mere 70 nm channel length provide a highly accessible confined space for catalytic reactions. A record-breaking NO conversion efficiency of 98.2 % under a weight hourly space velocity (WHSV) of 3.0×106  mL g-1 h-1 , as well as exceptionally high stability over 14 h and durability over a wide humidity range (RH=15-90 %) was realized over SBA(⊥) confined Cs3 Bi2 Br9 , well beyond its nonconfined analogue and the Cs3 Bi2 Br9 confine in Santa Barbara Amorphous (SBA-15). Mechanism studies suggested that the insulated pore channels of SBA(⊥) in CBB@SBA(⊥) endow concentrated electron field and enhanced mass transfer that render high exposure of reactive species and lower reaction barrier needs for ⋅O2 - formation and NO oxidation, as well as prevents structural degradation of Cs3 Bi2 Br9 . This work expands an innovative strategy for designing efficient photocatalysts for air pollution remediation.

First Evidence of Hindered Amine Light Stabilizers As Abundant, Ubiquitous, Emerging Pollutants in Dust and Air Particles: A New Concern for Human Health.

Hindered amine light stabilizers (HALSs) represent a crucial class of polymer additives that are extensively used in plastics and other polymeric materials. However, their environmental presence and related exposure risks have until now remained unexplored. This study addressed this critical knowledge by examining dust and air particles collected in South China, utilizing a comprehensive analytical approach to identify and quantify nine monomeric HALSs. A total of seven of the nine studied HALSs were detected in the samples, with bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate (Tinuvin 770) and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate (HS-508) identified as the most abundant and widespread pollutants. Median total concentrations of HALSs ranged from 417 to 8,830 ng/g in urban dust samples and from 28.6 to 70.9 pg/m3 in urban air particles. Notably, dust concentrations of HALSs significantly exceeded those of traditional well-known light stabilizers such as UV absorbers. Human exposure assessment indicated that in contrast to air inhalation dust ingestion represented a more substantial exposure pathway owing to the relatively low volatility of these newly identified chemicals. Predictive modeling suggests that many of the examined HALSs exhibited characteristics of persistence, high toxicity, or strong potential for long-range transport, underscoring their hazardous nature. This study represents the first comprehensive investigation into the prevalence of HALSs as a class of emerging pollutants widespread in the environment, necessitating heightened attention and further research in the future.

Molecular understanding on ultraviolet photolytic degradation of cyano liquid crystal monomers.

Cyano liquid crystal monomers (LCMs) are proposed as emerging chemical pollutants with persistent, bioaccumulative, and toxic properties. Herein, five cyano LCMs, including 4-cyano-4'-ethylbiphenyl (2CB), 4-Butyl-4'-cyanobiphenyl (4CB), 4-cyano-4'-ethoxybiphenyl (2OCB), 4-(trans-4-Ethylcyclohexyl)benzonitrile (2CHB) and 4-(trans-4-Vinylcyclohexyl)benzonitrile (2eCHB), were selected to investigate the reaction kinetics and excited state characteristic variations with their molecular structures by ultraviolet (UV) photolysis. Theoretical calculations reveal that the benzene ring, ethoxy and double bond can deeply alter the electron distribution of cyano LCMs. This will affect the exciton separation ability, excitation properties and active sites to electrophilic attack, causing the distinction in photolysis efficiency. Due to the effective charge separation during local excitation (LE) process and the property of being most susceptible to electrophilic attack by 1O2 and O2•-, 2eCHB with double bond exhibits the largest degradation rate. Conversely, the weakest exciton separation of 2OCB with ethoxy during charge transfer (CT) process limits its subsequent sensitized photolysis process. The molecular orbital and fragment contributions to holes and electrons further deepen the understanding of the excited states charge transfer. This study confirmed that the intrinsic molecular structure, chemical nature and existing sites directly defined the excitation and decomposition activity in the UV photolysis of cyano LCMs.

Uptake, accumulation and toxicity of short chain chlorinated paraffins to wheat (Triticum aestivum L.).

Short chain chlorinated paraffins (SCCPs) are ubiquitous persistent organic pollutants. They have been widely detected in plant-based foods and might cause adverse impacts on humans. Nevertheless, uptake and accumulation mechanisms of SCCPs in plants remain unclear. In this study, the soil culture data indicated that SCCPs were strongly absorbed by roots (root concentration factor, RCF>1) yet limited translocated to shoots (translocation factor<1). The uptake mechanism was explored by hydroponic exposure, showing that hydrophobicity and molecular size influenced the root uptake and translocation of SCCPs. RCFs were significantly correlated with logKow values and molecular weights in a parabolic curve relationship. Besides, it was extremely difficult for SCCPs to translocate from shoots back to roots via phloem. An active energy-dependent process was proposed to be involved in the root uptake of SCCPs, which was supported by the uptake inhibition by the low temperature and metabolic inhibitor. Though SCCPs at environmentally relevant concentrations had no negative impacts on root morphology and chlorophyll contents, it caused obvious changes in cellular ultrastructure of root tip cells and induced a significant increase in superoxide dismutase activity. This information may be beneficial to moderate crop contamination by SCCPs, and to remedy soils polluted by SCCPs with plants.

Unraveling the contribution of dietary intake to human phthalate internal exposure.

Human exposure to phthalates (PAEs) occurs primarily through diet, but the contribution of dietary exposure to the total internal exposure of PAEs has not been well studied. This work investigated the relationship between dietary exposure and human internal exposure to PAEs. Daily food samples were determined to evaluate the health risk of dietary exposure, and phthalate metabolites (mPAEs) were determined from urine samples of 360 volunteers of Guangzhou to assess their internal exposure. The total mPAEs concentration in the urine samples ranged from 8.43 to 1872 ng/mL, with mono-(2-ethylhexyl) phthalate (MEHP), mono-n-butyl phthalate (MnBP), and mono-isobutyl phthalate (MiBP) being the most predominant mPAEs. The concentration of PAEs in food ranged from n.d-40200 µg/kg, and benzyl butyl phthalate (BBzP), di-n-butyl phthalate (DnBP) and di-(2-ethylhexyl) phthalate (DEHP) were the most prevalent. PAE exposure was significantly associated with age, and children exhibited the highest concentration of mPAEs. Using Monte Carlo simulation to estimate PAE exposure's health risk eliminated uncertainties caused by single-point sampling and provided more reliable statistical results. The hazard quotient (HQ) was used to evaluate PAE exposure health risks. The results showed that 37% of the volunteers had HQ levels higher than 1 based on urinary mPAE concentrations, while 24% of the volunteers had HQ levels greater than 1 because of dietary exposure to PAEs. Dietary intake was the predominant exposure route for PAEs, and accounted for approximately 65% (24% out of 37%) of the cases where HQ levels exceeded 1. The work revealed the correlation between dietary external and internal exposure to PAEs, and further studies are needed to better understand the implications.

A review of liquid crystal monomers: Environmental occurrence, degradation, toxicity, and human exposure of an emerging class of E-waste pollutants.

Liquid crystal monomers (LCMs) are a class of organic compounds with diphenyl or dicyclohexane as the skeleton structure, which are widely used in the manufacturing of liquid crystal displays. They are recognized as novel organic compounds with persistence, bioaccumulation, toxicity, and potential for long-range transport. LCMs are inevitably released into the environment throughout the life cycle of electronic products, and their presence has been found in various abiotic matrixes (air, dust, sediment, leachate, soil) and biotic matrixes (aquatic organisms, human serum, and human skin wipe). Given that studies on LCMs are still in their infancy, this review comprehensively summarizes the extensive literature data on LCMs and identifies key knowledge gaps and future research needs. The physicochemical properties, production, and usage of LCMs are described. Their environmental distribution, degradation, toxicity, and human exposure are also discussed based on the available data and results. Existing data show that LCMs have large-scale environmental pollution and may pose potential ecological and health risks, but it is still insufficient to accurately assess their risks due to the lack of knowledge on LCMs in many areas, such as global contamination trend, environmental behavior, toxic effects, and human exposure assessment. We believe that future studies of LCMs need to investigate LCMs pollution on a large geographic scale, explore their sources, behavior, and fate in the environment, and assess their potential health hazards to organisms and humans.

Nationwide occurrence and distribution of liquid crystal monomers in municipal sewage sludge of China.

Environmental pollution and the fate of liquid crystal monomers (LCMs) in different matrices have received increasing attention owing to their potential persistence and toxicity. Sewage sludge, a representative environmental matrix, may be an important sink for LCMs. However, the contamination status of LCMs in sewage sludge remains unknown, especially on a large scale. In this study, a robust method was developed using GC-MS/MS analysis to determine 65 LCMs in sewage sludge. The occurrence of 65 LCMs in municipal sewage sludge in China was investigated for the first time. Among the 65 target LCMs, 48 were detectable, including 14 biphenyls/bicyclohexyls and their analogs (BAs) and 34 fluorobiphenyls and their analogs (FBAs). Six LCMs were detected at a rate >50 %. These results demonstrate the ubiquity of this class of synthetic chemicals in China. The total concentrations of LCMs in sludge ranged from 17.2 to 225 ng/g, with a median concentration of 46.4 ng/g. BAs were the major components of LCMs contamination in the sludge, with total BAs concentrations accounting for approximately 75 % of the total LCMs concentrations. A comparative analysis of sludge samples from different regions revealed significant regional distribution differences in LCMs: the concentrations of LCMs in sludge from East and Central China were significantly higher than those from West China (p < 0.05). Correlation and principal component analyses of the concentrations of LCMs revealed that LCMs in sludge share similar contamination sources and environmental behaviors. E-waste dismantling, domestic releases, and industrial releases may be sources of LCMs in sludge. Furthermore, the results of the degradation prediction implied that the plausible transformation products exhibited the same or even stronger persistence as the parent LCMs. Our study will be beneficial for LCMs regulation and offer suggestions for its development and safe application.

Association of polycyclic aromatic hydrocarbon internal exposure and urinary iodine concentration with thyroid volume in children.

Thyroid volume was proposed as a factor for malignancy in evaluating thyroid nodules. Previous studies have demonstrated the endocrine disrupting effect of polycyclic aromatic hydrocarbons (PAHs), but studies on the association between internal exposure of PAHs and thyroid volume are still scarce. In this work, we evaluated the association of polycyclic aromatic hydrocarbon internal exposure and urinary iodine concentration with thyroid volume in 590 school-age children without thyroid disease in Guangzhou, China. Urinary hydroxylated polycyclic aromatic hydrocarbons (OH-PAHs), urinary iodine concentrations, and thyroid volumes were measured. The mean concentrations of urinary iodine and ΣOH-PAHs were 271.1 µg/L and 3.27 µg/L, respectively, and the mean thyroid volume was 2.4 mL. The associations of urinary iodine and OH-PAH concentrations with thyroid volume were investigated by multivariable linear regression and the Bayesian kernel machine regression models. Urinary ΣOH-PAHs were observed to be significantly positively associated with thyroid volume in multivariable linear regression models. The increase in each unit in the log-transformed concentration of ΣOH-PAHs caused 3.88% change in thyroid volume. The Bayesian kernel machine regression model demonstrated a positive joint effect of increased urinary ΣOH-PAHs on thyroid volume. Moreover, urinary ΣOH-PAHs were statistically significant linked to urinary iodine, and iodine mediated the relationship between urinary OH-PAHs and thyroid volume with the mediated proportions of 15.2.

Prevalence of Novel and Traditional Synthetic Phenolic Antioxidants in Baby Food from China: A Dominant Pathway for Infant Exposure.

Synthetic phenolic antioxidants (SPAs) are a group of ubiquitous contaminants with multiple toxicities. However, current knowledge on the occurrence of SPAs in baby food and associated infant exposure is lacking. Herein, we analyzed three categories of baby food from China: infant formula, cereal, and puree, for a broad suite of 11 traditional and 19 novel SPAs. In addition to 11 traditional SPAs, up to 13 novel SPAs were detected in the baby food samples. The median concentrations of novel SPAs for infant formula, cereal, and puree were 604, 218, and 24.1 ng/g, respectively, surpassing those of traditional SPAs (53.4, 62.1, and 10.0 ng/g). The prevalent SPAs in the samples were butylated hydroxytoluene, 2,4-di-tert-butylphenol, pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (AO 1010), and octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate (AO 1076). Source analysis indicated that the prevalence of these four SPAs in baby food was associated with contamination of packaging materials, mechanical processing, or raw ingredients. Migration experiments demonstrated that contamination of plastic packaging constituted an important source. Exposure assessment suggested that there may be no appreciable health risk posed by the SPAs in baby food. Even so, baby food consumption was still a dominant pathway for infant exposure to SPAs, with a higher contribution than breast milk consumption, dust ingestion, dermal dust absorption, and air inhalation, which requires special attention.

Broadening the lens on bisphenols in coastal waters: Occurrence, partitioning, and input fluxes of multiple novel bisphenol S derivatives along with BPA and BPA analogues in the Pearl River Delta, China.

Bisphenol S derivatives (BDs) are being widely used as novel substitutes for BPA and BPA analogues (BPAs), causing pollution in various environmental compartments. However, the occurrence and fate of BDs in coastal waters are currently unknown. To broaden the lens on bisphenols in coastal waters, this study measured a broad suite of 23 bisphenols, including 12 BDs along with BPA and 10 BPAs, in water, suspended particulate matter (SPM), and sediment from eight major outlets of the Pearl River Delta, China (PRD). In addition to BPA and BPAs, all the 12 BDs were detected in the collected samples. The total concentration of 12 BDs ranged from 1.2 to 25 ng/L (median of 4.3 ng/L) in water samples, 0.80-13 ng/g dw (median of 3.0 ng/g dw) in SPM samples and 0.48-3.7 ng/g dw (median of 0.64 ng/g dw) in sediment samples. For most individual BDs, they had comparable concentrations to individual BPAs. In addition, logKd values of the frequently detected bisphenols, including BPA, BPS, BPF, 4-((4-Isopropoxyphenyl)sulfonyl)phenol (BPSIP), 2,4-bis(phenylsulfonyl)phenol (DBSP), and other 9 bisphenols, were significantly correlated with their logKow values (R2 = 0.38, p < 0.05), indicating that the partitioning of bisphenols between the aqueous and SPM phases were strongly influenced by hydrophobic interaction. Based on bisphenols' concentrations in water from the eight outlets of PRD, the estimated input fluxes of novel BDs (1900 kg/y) were found to be even higher than that of BPAs (550 kg/y). This indicates that the riverine input of BDs into the coastal environment is gradually increasing, which should be taken seriously in the future.

Distribution characteristics of photoinitiators and their flux estimation from the Pearl River Delta to the coastal waters of the South China Sea.

Photoinitiators (PIs) are widely used in industrial polymerization processes. It has been reported that PIs are ubiquitous in indoor environments and that humans are exposed to PIs, but the occurrence of PIs in natural environments are rarely known. In the present study, 25 PIs, including 9 benzophenones (BZPs), 8 amine co-initiators (ACIs), 4 thioxanthones (TXs) and 4 phosphine oxides (POs), were analyzed in water and sediment samples collected from eight riverine outlets of the Pearl River Delta (PRD). Eighteen, 14, and 14 of the 25 target PIs were detected in water, suspended particulate matter (SPM) and sediment samples, respectively. The total concentrations of PIs in water, SPM, and sediment were in the ranges of 2.88‒96.1 ng/L, 9.25‒923 ng/g dry weight (dw), and 3.79‒56.9 ng/g dw, with geometric mean concentration (GM) of 10.8 ng/L, 48.6 ng/g dw, and 17.1 ng/g dw, respectively. A significant linear regression was observed between the log partitioning coefficients (Kd) values of PIs and their log octanol water partition coefficient (Kow) values (R2 = 0.535, p < 0.05). The annual riverine input of PIs to the coastal waters of the South China Sea via eight main outlets of the PRD was estimated to be 4.12 × 103 kg/year, and the ∑BZPs, ∑ACIs, ∑TXs and ∑POs contributed to 1.96 × 103, 1.24 × 103, 89.6 and 830 kg/year, respectively. This is the first report of a systematic description of the occurrence characteristics of PIs exposure in water, SPM, and sediment. The environmental fate and risks of PIs in aquatic environments need further investigations.

Nationwide Occurrence and Unexpected Severe Pollution of Fluorescent Brighteners in the Sludge of China: An Emerging Anthropogenic Marker.

Fluorescent brighteners (FBs) are a group of mass-produced dyestuff chemicals that have been extensively used for decades. However, knowledge of their occurrence in municipal wastewater treatment plants on a large geographical scale remains unknown. Herein, we implemented the first nationwide survey for wastewater-derived FBs in sludge across major cities in China. All 25 target FBs were detected in the nationwide sludge. Ionic FBs exhibited much higher concentrations than nonionic FBs. The total sludge concentrations of 25 FBs (∑25FBs) ranged from 7300 to 1,520,000 ng/g, with a median of 35,300 ng/g. A clear geographical distribution of significantly higher concentrations of FBs was found in East and Central China than in West China (p < 0.05). The sludge concentrations of ∑25FBs were correlated well with the gross domestic product (GDP) and population size at the provincial level in China (p < 0.05), demonstrating the significance of anthropogenic impacts on FB levels in urban sludge. The nationwide annual emission of total FBs into sludge in China is estimated to be 835 tons/year, of which 134 tons/year is directly released into sludge-applied soils. Our work highlights another new class of chemicals that significantly contribute to the chemical mixtures in urban sludge and thus require immediate attention.

Widespread Occurrence and Transport of p-Phenylenediamines and Their Quinones in Sediments across Urban Rivers, Estuaries, Coasts, and Deep-Sea Regions.

p-Phenylenediamines (PPDs) are widely used as antioxidants in tire rubber, and their derived quinone transformation products (PPD-Qs) may pose a threat to marine ecosystems. A compelling example is N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD)-derived quinone, called 6PPD-Q, as the causal toxicant for stormwater-linked acute mortality toward coho salmon. However, the knowledge of the co-occurrences of PPDs and PPD-Qs and their transport from freshwater to oceanic waterbodies on a large geographical scale remains unknown. Herein, we performed the first large-scale survey of these chemicals in sediments across urban rivers, estuaries, coasts, and deep-sea regions. Our results demonstrated that seven PPDs and four PPD-Qs are ubiquitously present in riverine, estuarine, and coastal sediments, and most of them also occur in deep-sea sediments. The most dominant chemicals of concern were identified as 6PPD and 6PPD-Q. Total sedimentary concentrations of PPDs and PPD-Qs presented a clear spatial trend with decreasing levels from urban rivers (medians: 39.7 and 15.2 ng/g) to estuaries (14.0 and 5.85 ng/g) and then toward coasts (9.47 and 2.97 ng/g) and deep-sea regions (5.24 and 3.96 ng/g). Interestingly, spatial variation in the ratios of 6PPD to 6PPD-Q (R6PPD/6PPD-Q) also presented a clear decreasing trend. Our field measurements implied that riverine outflows of PPDs and PPD-Qs may be an important route to transport these tire rubber-derived chemicals to coastal and open oceans.

Microplastics in take-out food: Are we over taking it?

Take-out food has become increasingly prevalent due to the fast pace of people's life. However, few study has been done on microplastics in take-out food. Contacting with disposable plastic containers, take-out food may be contaminated with microplastics. In the present study, abundance and characteristics of microplastics in total of 146 take-out food samples including solid food samples and beverage samples (bubble tea and coffee) were determined and identified. The mean abundance of microplastics in take-out food was 639 items kg-1, with the highest value in rice and the lowest value in coffee. Fragments shape, transparent color and sizes ≤ 500 µm were the main characteristics of microplastics in those food, and polyethylene was the main polymer type. Our results indicated that microplastics in take-out food was influenced by food categories and cooking methods, as well as food packaging materials. Approximately 170-638 items of microplastics may be consumed by people who order take-out food 1-2 times weekly.

First report on per- and polyfluoroalkyl substances (PFASs) in coral communities from the Northern South China sea: Occurrence, seasonal variation, and interspecies differences.

In this study, the contamination levels and seasonal variation of 22 PFASs were investigated in coastal reef-building corals (n = 68) from the northern South China Sea (SCS) during wet and dry seasons. Perfluorohexane sulfonate (PFHxS) was the predominant PFASs in all coral samples, representing 43% of the total PFAS. Long-chain PFASs, as well as PFAS alternatives, were frequently detected above the MQL (>88%) but showed relatively low concentrations compared to short-chain PFASs in most species and seasons. Seasonal variation of PFAS concentrations were observed in branching corals, indicating that the accumulation of PFASs may be associated with coral morphological structures. Interspecies differences in PFAS levels agree well with different bioaccumulation potentials among coral species. Redundancy analysis (RDA) showed that seasonal factor and coral genus could partly influence PFAS concentrations in coral tissues. In summary, our study firstly reported the occurrence of PFASs in coral communities from the SCS and highlights the necessity for future investigations on more toxicity data for coral communities.